Victorian Wall Bath Mixer Taps, Riser, Rain Head & Hand Shower Set, 011/019n/350

  

WALL MOUNTED VICTORIAN STYLE BATH SHOWER MIXER TAPS WITH A QUALITY EXPOSED DUAL FUNCTION RIGED RISER SET. Bath Shower Mixer Taps - Specification & Features. Traditional Victorian Style set of Bath Shower Mixer Taps with Tap Gland mechanisms.

The taps are Wall-mounted i. They are secured to the all or a vertical surface. The body and fittings are solidly made from Brass with a polished'mirror' Chrome finish. The'Cross' handles are marked with'H' and'C'. It includes standard wall mounting connections ('S' Tails, Chrome cover plates & washers).

The distance between inlet centres is a standard 150mm/15cms. The Tails allow a variation of approx +/- 20mm to this to assist with fitting. From the wall to the tip of the spout it measures approx 16 cms (with the chrome cover plates fitted), and a drop of approx 5.5 cms from the centre of the tap handles.

The minimum water pressure required for the mixer is usually 0.5 bar with 1 bar being recommended. It is suitable for a regular gravity tank system with a height drop of at least 5 metres, however on account of the shower set we would recommend a system with at least 1 bar of pressure for both hot and cold. The Contemporary'Exposed' Shower Riser pipework is in three main sections with an adjustable fixing bracket that is fixed to the wall by screws/plugs.

The riser is solidly made from Brass with a polished Chrome Finish. This can be shortened by leaving out the shorter straight riser section or by sliding down the upper riser into the longer straight section before securing it. It comes with a matching Chrome 8/20cms diameter Round'Bell' Style Shower Head.

The Shower Head is solidly made from Brass and has a swivel joint on top to enable you to angle it. It comes with Chrome Handheld Shower Head with a white'ridged' ABS plastic handle (see gallery picture) and a 1.5m Flexible Hose.

The Handheld Head has its own sliding adjustable'plastichrome' holder attached to the Riser Rail. There is a Diverter Valve that is either positioned just above the Mixer or in between the two straight sections (as in the gallery picture), and which allows you to switch water between the 2 shower functions. The entire Bath/Shower set Measures approx 1.52 metres tall from the centre of the inlets on the mixer (or 1.59m from the tip of the spout) to the top of the Overhead section, and the'Arm' extends out approx 32 cms from the centre of the Riser Rail to the centre of the main Shower Head. The height can be shortened by leaving out the short riser section or sliding the upper section down inside the longer straight section before securing it. This item is in the category "Home, Furniture & DIY\Bath\Showers, Baths & Parts\Shower Heads & Combos".

The seller is "ourtapscom" and is located in this country: GB. This item can be shipped to United Kingdom, Antigua and Barbuda, Austria, Belgium, Bulgaria, Republic of Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Australia, United States, Bahrain, Canada, Brazil, Japan, New Zealand, China, Israel, Hong Kong, Norway, Indonesia, Malaysia, Mexico, Singapore, South Korea, Switzerland, Taiwan, Thailand, Bangladesh, Belize, Bermuda, Bolivia, Barbados, Brunei Darussalam, Cayman Islands, Dominica, Ecuador, Egypt, Guernsey, Gibraltar, Guadeloupe, Grenada, French Guiana, Iceland, Jersey, Jordan, Cambodia, Saint Kitts-Nevis, Saint Lucia, Liechtenstein, Sri Lanka, Macau, Monaco, Maldives, Montserrat, Martinique, Nicaragua, Oman, Pakistan, Peru, Paraguay, Reunion, Turks and Caicos Islands, Aruba, Saudi Arabia, South Africa, United Arab Emirates, Chile, Bahamas, Colombia, Costa Rica, Dominican Republic, Guatemala, Honduras, Jamaica, Kuwait, Panama, Philippines, Qatar, El Salvador, Trinidad and Tobago, Vietnam.

1. Colour: Silver
2. Shower Head Diameter: 200mm Main overhead
3. Material: Mostly Brass, Chrome
4. Shower Head Shape: Round
5. Installation: Wall Mounted
6. Type: Bath Shower Set
7. Features: Swivel Spout, Adjustable Riser Height, Adjustable Angle
8. Tap Hole Spacing: 150mm
9. Minimum Bar Pressure: 1 bar recommended
10. Shower Head Included: Yes
11. MPN: AED-TEL Mixer
12. Finish: Chrome
13. Spray Patterns: Rain
14. Room: Bathroom
15. Brand: OurTaps
16. Number of Shower Heads: 2
17. Suitable For: Bath, Shower
18. EAN: 7625656185722